I've been very busy with work lately, so I haven't had enough time to work on my RF projects. So I decided to at least share the board layout. With the other information on this blog, it would be easy for anyone to build the board themselves. So check out the OSH Park layout and order a few boards. They're only like 80 cents each since they're so small. Anyone who gets them going drop a comment.
https://oshpark.com/shared_projects/0jyERLQD
How did you get on with the circuit? I'm really keen to build a combined SAW filter and LNA for ADSB (1090MHz). I'm considering using your amp design.
ReplyDeleteSeems to work great, but I don't have the right equipment for a good analysis. I've used this for L-band reception and it does the job fine. ADSB shouldn't be a problem. Although I got my inspiration from the LNA4ALL, so you could use that as a reference as well.
Delete